Large ten-temperature zone lead-free reflow soldering equipment GSD-L10

0563-2251668 / 15850207552 在线咨询


Guangshengde large-scale ten-temperature zone lead-free reflow soldering equipment GSD-L10 appearance and structure advantages

● The frame is made of 40×80 flat through, the steel frame structure is reasonable, not easy to deform, and the welding adopts two-guarantee welding, which is stable and solid. The coat is made of T:2.0 national standard Angang cold-rolled plate, processed by CNC machine tools, front and rear doors are air-conditioned, the upper cover is designed reasonably, and it can be easily opened with a force of 3KG. After opening, it becomes a dovetail shape. It is more convenient and simple to check and maintain the motor. It is safe and labor-saving to open. The design of the whole machine is reasonable, efficient, energy-saving, safe and environmentally friendly;

● The furnace chamber is more convenient to open, fully automatic electric jacking, safety rod support protection, safe and reliable; the heating module adopts a split combination, stable performance, convenient and quick disassembly and maintenance, and more convenient to replace the heating wire; all interiors are made of imported stainless steel plates, CNC It is processed with accurate size and fine workmanship, which eliminates the internal paint removal and deformation of traditional reflow soldering;

● Reasonable mechanical transmission parts, processed by precision machine tools, fully automatic wide and narrow adjustment, special guide rails, durable and non-deformation, and use high temperature resistant chains, with automatic refueling function, free movement at 350 ℃ high temperature, PCB board The transmission method adopts stepless frequency conversion and variable speed, the network chain is synchronized, and the stability is good; there will be no undesirable phenomena of traditional reflow soldering;

● The unique automatic flux recovery system allows most of the exhaust gas to be filtered or recovered and returned to the furnace, reducing heat loss, and at the same time making the flux recovery more thorough and keeping the furnace clean for a long time.

Video introduction of performance characteristics of GSD-L10 large-scale lead-free reflow soldering equipment in ten temperature zones

Characteristics of GSD-L10 control system of Guangshengde large-scale lead-free reflow soldering equipment in ten temperature zones

● Windows operating system, Chinese and English interface, easy to learn; two control methods, computer control and emergency manual control, with safety protection function; (independently developed software: Guangshengde PCBASE reflow soldering control software V1.0)

● The communication between PC and PLC (single-chip microcomputer) adopts PC/PP protocol, which works stably and prevents crashes;

● Powerful software function, online temperature measurement of PCB board, and analysis, storage and printing of the data curve at any time;

● Automatic monitoring and display of equipment working status, which is helpful for monitoring equipment at any time;

Guangshengde large ten-temperature zone lead-free reflow soldering equipment GSD-L10 overall performance advantages

● In order to prolong the service life of the motor, our company’s technicians professionally designed it; make the internal cooling cycle convection, so that the temperature around the motor drops to about 38°C;

● The high-quality, high-temperature, high-speed motor has smooth wind, low vibration and low noise;

● Professional wind wheel design, stable wind speed, effectively prevent the uniformity of the wind when the PCB board is heated, and achieve higher repeated heating;

● Each temperature zone adopts forced independent circulation, independent PID control, and upper and lower independent heating methods, so that the furnace cavity temperature is accurate and uniform, and the heat capacity is large; the leading heating method solves the problem of dead corners during reflow soldering. Suitable for CSP, BGA, 0201 CHIP Welding of electrical components;

● Online UPS equipped with power failure protection function to ensure the normal output of the PCB board after power failure without damage;

● Independently controlled cooling system, made of imported stainless steel, upper and lower cooling convection, the cooling curve is a mirror image of the welding temperature curve, which is in full compliance with the SMT international certification standard.

● The insulation layer is made of high-quality aluminum silicate insulation material, and the multi-layer insulation furnace design. The surface temperature of the furnace outer jacket is about 5 degrees higher than the ambient temperature, which effectively reduces the working environment temperature, has good insulation effect, and heats up quickly, from room temperature to working temperature ≤20min; Special furnace design, low power consumption;

Guangshengde large ten-temperature zone lead-free reflow soldering equipment GSD-L10 details


special reminder

1. Guangshengde reflow soldering equipment is underwritten by Ping An Insurance Company of China, and the amount of compensation can reach 5 million. Guangshengde reflow soldering brings greater guarantee for customers' safe production.

2. The purchase of Guangshengde reflow soldering equipment can be paid by monthly installments, please consult Guangshengde for details.


projectSpecification type
Control SystemComputer+PLC/Special MCU
Heating/cooling zoneTop 10, bottom 10, a total of 20 heating zones, 2 cooling zones
Length of heating zone3350mm
Temperature control rangeRoom temperature~350℃
Temperature control accuracy±1~2 ℃
Three-point temperature difference±2℃
cooling methodForced air cooling (axial air cooling system)
PCB size(W)50~(W)400mm
PCB transmission height900±20mm
Delivery methodChain track + mesh belt conveyor
Transmission directionLeft → right
Transmission speed0~2000mm/min  Variable frequency adjustable
Chain track widening range50~500mm
Transmission mesh belt width460mm
Power failure protectionUPSpower supply
power supplyA3ø380V 50HZ
Normal operating power/total power6/88KW
net weight2350KG